Electric Lock Seaming Machine2017/12/12Electric Lock Seaming Machine Performance Feature:Electric lock seaming machine can lock 0.3-1.2 square HVAC air duct. This machine is small and very easy to operate. It's suitable for lock closing du...
Small Electric Shearing Machine2017/12/12Small Electric Shearing Machine Performance Feature:Small electric shearing machine is with reduction motor and no gears structure so that the machine requires less maintenance. This small guillotine ...
Electric Shearing Machine2017/12/12Performacne Features: The machine is overall steel-welded and gate-type with chain drive.The motor has its own brake, which means no power consuming when not shearing. It's suitable for processing she...
Electric Rolling Machine2017/12/12Performance Features:Pre-bending function makes straight edges narrower, and it can even round small round pipe with diameter of 100mm. Combined with manual worm gear and eccentric wheel device the ma...
August 30, 2021The spiral duct machine is a machine for producing spiral ducts. Spiral ducts, also known as spiral seam thin-walled ducts, were first used in the military industry of Western countries, such as warsh...view
March 29, 2022The spiral duct machine is a thin-walled pipe made of a spiral bite made of metal strips. It is round, no welding, no air leakage and no water leakage. It is mostly used for air supply and bulk materi...view
April 11, 2019The manufacturing steps of the duct fabrication equipment are as follows:1. The air duct should be pressed into a connecting body, then the material is cut and then formed, and finally, the four corne...view
June 27, 2019Hydraulic riveting machine is a processing process that uses stamping machine equipment and special connecting to strengthen high pressure in an instant. According to the cold extrusion deformation of...view
July 30, 20181. Cleaning of the auto duct lineThe auto duct line will store a lot of materials and sundries in the long working process. Therefore, it should be cleaned and maintained in time to avoid problems. Th...view
July 30, 20181. The rotation direction of the motor should be observed for the first test of the machine. If it does not meet the requirement, it can only change the supply line of the power supply, and the inner ...view