How to Clean Spiral Duct Machines?

What is the correct cleaning method for automatic spiral duct machine?

Vacuum cleaning

Use a handle-type vacuum cleaner similar to clean the spiral duct machine, use a brush to directly contact the inner wall of the duct of the spiral duct machine to remove dust. This method requires a large manhole to be added to the duct so that the operator can get as much dust as possible. However, because the duct cannot form a completely negative pressure state, this method may miss some dust.

Electric washing of the spiral duct machine

Use pneumatic or electric brushes to remove dirt, and then use the same method and direction as air washing to suck the dirt into the vacuum cleaner. This method needs to be careful to avoid damaging the appearance of the automatic spiral duct machine.

Gas flushing

In this method, compressed air is delivered through a hose equipped with a nozzle, which is connected to the spiral duct machine. The nozzle design allows dust in the compressed air to enter. In our life, we often have the opportunity to contact duct products, which are closely related to our lives, especially ventilation ducts. In use, we must learn how to maintain and clean the spiral duct machine to better use it as a spiral duct machine.

The spiral duct machine ensures a dry environment

With the development of industry, the role of spiral duct machines in daily production is becoming more and more prominent, not only improving work efficiency, but also saving a lot of manpower. However, spiral duct machines have certain requirements for the working environment. Only by providing a good production environment for the spiral duct machine can its normal operation be guaranteed. So there are three points to note:

• Ensure that the working environment of the spiral duct machine is clean and hygienic, do not litter, and do not place flammable and explosive materials.

• Ensure a dry environment to prevent material from getting moldy and affecting the internal parts of the spiral bending machine.

• Try to make the workshop of the spiral duct machine spacious, because the bending machine is a large-scale equipment, there will inevitably be noise, and a spacious environment is conducive to noise output and will not be very noisy. The spiral duct is also called a spiral bite-seam thin-walled tube. It was originally used in Western military industries, such as the exhaust system of warships and ships, and later used in civilian facilities such as trains, subways, and mines. This system can handle stainless steel, galvanized steel plate, aluminum plate, and copper plate. It is a fully automatic winding equipment, fully automatic installation and measurement equipment, and a fully automatic digital system that can produce various different pipes.

Many people are not familiar with the spiral tube machine. The current spiral duct market is generally divided into three categories according to the material: galvanized spiral duct, stainless steel spiral duct, and composite spiral duct. Among them, stainless steel duct has good quality and strong applicability, but it is expensive. The spiral duct widely circulated in the market is made of galvanized sheet. Galvanized spiral duct is basically the characteristics of stainless steel spiral duct.